QUAKE ALERT
Most recent earthquake
in North America
LAST QUAKE
1.9
42 km N of Kernville, CA
Days
0
0
Hours
0
0
Minutes
0
0
Seconds
0
0

What Is an Earthquake Early Warning System?

A Mission-style Southern California fire station with a fire engine and golden foothills

An earthquake early warning system can give a facility seconds of notice before strong shaking arrives. Last Tuesday morning showed why that distinction matters.

A magnitude 4.7 earthquake struck about 22 miles southeast of Mexicali, Baja California. At 10:27 a.m. Pacific, the U.S. Geological Survey’s ShakeAlert system detected it, issued its first message 9.3 seconds after the origin time, and distributed a Wireless Emergency Alert in California.

ShakeAlert’s initial magnitude estimate was 5.2. Its peak estimate, 14.4 seconds after origin, was 5.4. The Wireless Emergency Alert went out because that peak estimate met the public threshold of magnitude 5.0 or greater. The later catalog magnitude settled at 4.7. People in the border region reported feeling the shaking. For a hospital, school, fire station, or plant, the question is not whether a phone buzzed. It is whether the building itself could act in those seconds.

What an earthquake early warning system is — and is not

An earthquake early warning system does not predict earthquakes. It detects an earthquake that has already started, estimates its location and magnitude, and sends a warning that strong shaking may still be on the way.

Earthquakes produce different kinds of seismic waves. Faster P-waves are usually felt as a jolt, if they are felt at all. Slower S-waves and surface waves typically cause the damaging shaking. Sensors close to the origin can pick up the early waves and get a message out before the slower waves reach communities farther away. The USGS describes the result as seconds of warning that people can use to Drop, Cover, and Hold On, and that facilities can use to trigger automated safety actions. Depending on distance from the epicenter, that window can be up to roughly 60 seconds. Sites very close to the origin may be in a late-alert zone, where shaking arrives with the alert, or before it. If you feel shaking, take protective action immediately. Do not wait for a notification.

How the system works on the West Coast

In California, Oregon, and Washington, the public system is ShakeAlert, operated by the USGS with state, university, and private partners. California’s seismic network is now about 95% installed, which improves detection coverage across the state. In simple terms:

  1. A network of seismic stations detects ground motion.
  2. Processing centers estimate the earthquake’s location, magnitude, and expected shaking.
  3. If the event meets alerting criteria, USGS issues a ShakeAlert Message.
  4. Licensed partners deliver that message to people and to automated systems.

The last step is where most confusion sits. ShakeAlert is the detection and messaging layer. It is not, by itself, a PA announcement in a hospital, an elevator recall in an office tower, or a gas-valve shutdown in a plant. Those actions happen only when a facility is connected to a delivery system that can receive the ShakeAlert Message, calculate the forecast shaking at that site, and carry out pre-set protocols if the site’s thresholds are met.

Public phone alerts are one delivery path. Wireless Emergency Alerts, Android earthquake alerts, and apps such as MyShake can reach people on compatible devices, but they are a poor fit as the only plan for a building full of patients, students, or workers. That is a big reason most facilities still aren’t connected to automated response.

Why a phone alert is not a facility system

Public alerts are designed around public thresholds. ShakeAlert’s post-event summary for the Mexicali earthquake is explicit: a Wireless Emergency Alert is distributed to the area expected to experience intensity IV or greater shaking if ShakeAlert’s peak magnitude estimate is at least 5.0. Licensed partners that serve facilities can use different thresholds, including site-specific shaking-intensity settings, matched to the application.

That difference matters in both directions. A public alert may go out when a facility would have stood by. A more serious event may also produce useful seconds of warning that never become a coordinated building response if the only devices in the room are personal phones. Phones get silenced or left in lockers, and even when one alerts, it reaches one person. It does not automatically announce a warning over the PA, recall elevators, open bay doors, or shut off gas, fuel, or water.

The USGS makes this distinction clearly: seconds of warning can let a hospital safely shut down an MRI, a school activate its PA system, or a transit agency slow a train. Those outcomes require a connection to the systems the facility already uses. Real-time estimates can also change as more stations report, which is what happened on November 3. A facility system can be set to act when forecast shaking at that site meets a Modified Mercalli Intensity threshold the operator has chosen in advance, instead of waiting to see whether a wireless alert met the public cutoff.

How facilities actually use those seconds

Think of earthquake early warning as an operational layer. Structural upgrades help a building survive. Early warning helps people and equipment act before the strongest shaking arrives.

In healthcare, those seconds can alert staff over the PA, fire alarm, or radio, pause a procedure, recall elevators, and start backup generators. That operational layer sits alongside, and does not replace, California’s hospital seismic requirements. The Oregon Hazards Lab’s ShakeAlert Healthcare Resilience Workshop notes that hospitals still need unit-specific procedures. In schools, the priority is usually a campus-wide, automatic PA message so everyone hears the same instruction at the same time — the same gap we described when we looked at connecting earthquake early warning in schools.

In fire stations, automated actions can open bay doors so they do not jam and shut off gas or fuel so crews can get out. Cal OES has already funded a fire station pilot to deploy earthquake early warning and automated actions, including opening bay doors, at seven stations in Los Angeles County and the Morongo Basin, with work anticipated to finish in 2026. In industrial, utility, and transit settings, the same warning can halt machinery, de-energize electrical panels, close or throttle valves, control gates, start generators, and slow or stop trains. Metrolink has publicly described how it uses ShakeAlert data with its Positive Train Control system to slow trains when a qualifying earthquake is detected.

The theme is automation. A person can use a few seconds to drop, cover, and hold on. A building needs those seconds pre-programmed. Independent analysis supports the same idea. Cal OES’s 2026 airport feasibility study found benefits well above costs at airports like Los Angeles International Airport. We break down those numbers in our guide to earthquake early warning for airports.

Where this is available

ShakeAlert currently serves California, Oregon, and Washington. Canada’s national system, built by Natural Resources Canada, began operating in western British Columbia in 2024 and was activated in Quebec and Ontario in 2025. For facility managers, the question is the same: when an alert is issued, does the building do anything?

What to look for if you are evaluating a system

If you operate a hospital, school, public-safety facility, plant, transit system, or campus in ShakeAlert territory, start with the actions that would help in the first seconds: occupant alerting, elevator recall, door and gate positions, gas, fuel, and water valve shutoff, machinery shutdown, and backup power. Then ask whether your existing PA, fire-alarm, radio, signage, access-control, and building-automation systems can receive an automated trigger. Connecting to systems already in place helps Cal OES and FEMA funding for facility preparedness go further, including Hazard Mitigation Grant Program dollars, because the facility does not have to replace what it already owns.

Early Warning Labs is an official USGS ShakeAlert licensed partner and a founding research-and-development partner on last-mile delivery and alerting. It has been delivering commercial earthquake early warning since 2014. Its systems power more than 90% of the commercial ShakeAlert installations published by the USGS and protect more than 10 million people.

When ShakeAlert detects an earthquake, Early Warning Labs calculates the forecast shaking intensity and countdown at each protected site. If the forecast meets that site’s thresholds, the system triggers audio and visual alerts and mechanical actions, with up to roughly 60 seconds of warning depending on distance. Facilities can deploy Cloud Quake, an on-site CQ Box, or a virtual IP interface that requires no on-site hardware for networked platforms such as InformaCast. Either option integrates with the mass-notification and building-control systems already in place: PA, fire-alarm, and two-way radio alerting; digital signage; fire-station bay doors; elevator recall; gas, fuel, and water valve shutoff; gates; machinery; generators; and train control.

USGS has publicly noted that Early Warning Labs has helped Los Angeles-area organizations connect to ShakeAlert, including LA Metro, Cedars-Sinai Medical Center, NBCUniversal, Santa Monica College, and Los Angeles City Hall. The company is also delivering station alerting and automated bay-door action as part of the Cal OES-supported fire station pilot.

If you want to see what that would look like in your building, contact the Early Warning Labs team to schedule a demo. We will walk through your operations, look at the systems you already have, and show how automated early warning can fit your facility.

Frequently asked questions

What is an earthquake early warning system?

An earthquake early warning system detects an earthquake that has already started, estimates its location and magnitude, and sends a warning that strong shaking may still be on the way. It can alert people and trigger automated actions in a facility, such as a PA announcement, elevator recall, or valve shutoff.

How does an earthquake early warning system work?

Seismic stations detect fast-moving P-waves, then processing centers estimate the earthquake and issue a ShakeAlert Message if it meets alerting criteria. Licensed partners deliver that message to phones, apps, and facility systems. The slower, more damaging waves may still be traveling toward a site when the alert goes out.

Does an earthquake early warning system predict earthquakes?

No. The USGS is clear that early warning is not prediction. The system does not say when or where the next earthquake will occur. It provides a short notice after an earthquake has begun, before the strongest shaking reaches some locations.

How much warning time can an earthquake early warning system provide?

Warning time is usually seconds, and depending on distance from the epicenter it can be up to roughly 60 seconds. Sites very close to the origin may get little or no notice, because shaking can arrive with the alert or before it. If you feel shaking, take protective action immediately.

Is a phone alert the same as a facility earthquake early warning system?

No. A Wireless Emergency Alert or phone app can tell a person to Drop, Cover, and Hold On. A facility system is configured to act when forecast shaking at that site meets a chosen threshold, and it can alert an entire building and trigger automated equipment responses at the same time.

About EWL

Early Warning Labs (EWL) has partnered with the USGS to develop a powerful technology, that gives people time to take cover and creates automated responses for businesses, transportation & machinery to prevent massive damage.