Earthquake early warning for airports: what California’s study and Cal OES funding show
California has started paying for earthquake early warning for airports, and it now has the numbers to explain why. In 2026, the Governor’s Office of Emergency Services (Cal OES) published an airport feasibility study with UC Berkeley that put a benefit-cost ratio on specific protective actions at Los Angeles International Airport (LAX) and Palm Springs International Airport (PSP). Cal OES also ran a new grant round dedicated to putting earthquake early warning into California airports.
For airport emergency managers, facilities teams, and fire officials, the study answers the question that usually stalls these projects: which actions are worth funding first?
Why airports need more than a phone alert
Airports put thousands of people under suspended ceilings and next to escalators, moving walkways, fuel systems, gas lines, and an on-site fire station. The feasibility study looked at how past California earthquakes affected airports. During the 1989 Loma Prieta earthquake, liquefaction severely damaged the main runway at Oakland International Airport, and the airport shut down to evaluate it. San Francisco International saw broken control tower windows and nonstructural damage in its terminals, and flights were suspended that night.
Earthquake early warning cannot stop a runway from cracking, and the study says so plainly. What it can do is buy seconds for people and equipment. On the West Coast, the USGS ShakeAlert system detects an earthquake that has already started and sends an alert before the strongest shaking reaches many locations. Phones can receive Wireless Emergency Alerts, but public alerts follow public alerting thresholds and reach one person at a time. An airport needs its terminal PA, visual paging, and building systems to act on their own. If you’re new to the topic, start with our guide to how an earthquake early warning system works.
What the Cal OES airport feasibility study found
Cal OES funded the study through a partnership with the California State Transportation Agency and UC Berkeley’s Resilient and Innovative Mobility Initiative, according to the 2026 California Earthquake Early Warning Business Plan Update. Researchers compared the cost of each early warning application, including installation, maintenance, staff training, and integration, against the injuries, damage, downtime, and emergency response costs it could help avoid. A benefit-cost ratio above 1.0 means the modeled benefits are larger than the costs. That makes the study a practical reference for anyone budgeting earthquake early warning for airports.
Benefit-cost ratios at LAX and Palm Springs
These are the study’s benefit-cost ratios (Table 6.4) for the main applications:
- Alerts to passengers and staff (modeled as smartphone alerts): 25.8 at LAX, 2.1 at PSP
- Fuel shutoff: 20.2 at LAX (no ratio reported for PSP)
- Fire station bay doors: 15.0 at LAX, 0.7 at PSP
- Gas shutoff: 14.4 at LAX, 100.0 at PSP
- Elevator stop at the nearest floor: 0.43 at LAX, 0.04 at PSP
Two patterns stand out. First, the benefits of people-focused actions grow with passenger volume, while costs stay fairly similar from one airport to the next. That is why the study concludes that earthquake early warning offers greater value at larger airports than at smaller ones when seismic hazard is similar. Second, hazard matters. Palm Springs has a higher chance of strong shaking than LAX, so its gas shutoff benefit came out about three times higher, which produced a ratio of 100.
Where to start, and what to scope carefully
The LAX case study is direct about priorities. It says gas valve shutoff “has one of the highest BCRs of the applications examined in this study and is a good candidate for prioritization.” It describes fire station bay doors as having “high quantified benefits and low risk of false positives.” Fuel shutoff scored high too, but the researchers flagged its complexity and suggested it follow a successful first round of early warning systems. Stopping baggage handling systems was rated one of the more technically straightforward actions at LAX, with low risk if a false alert occurs.
Elevators are the cautionary case. Wiring every elevator, escalator, and moving walkway at once was hard to recommend for early phases. The study suggests a selective approach for high-traffic conveyances, which could cut cost and complexity while keeping much of the benefit.
The Cal OES Earthquake Early Warning Implementation Program for Airports
Cal OES’s 2026 business plan says the agency is using the study’s findings to encourage airport adoption and launched a new airport-focused grant. According to the California Grants Portal listing, the FY 2025-26 Earthquake Early Warning Implementation (EA) Program for Airports worked like this:
- Who could apply: commercial service airports located in California
- Total funding: $800,000 in state funds
- Award size: up to $400,000 per award
- Match: none required
- Funding method: reimbursement
- Application deadline: March 23, 2026
- Period of performance: June 1, 2026 to March 31, 2028
That round is closed, and as of November 17, 2026, Cal OES has not posted another airport round on the portal. Airports tracking Cal OES grants can watch the portal for the next round. Those that want to be ready for future state funding, or that plan to pay for early warning from capital or safety budgets, can do the scoping work now. California has kept investing in earthquake preparedness even as federal recovery funding has become less predictable, and connecting systems an airport already owns helps preparedness funding go further.
How to scope earthquake early warning for airports
The study’s recommendations and the benefit-cost results point to a phased plan:
- Start with alerting through systems you already own. Terminal PA, visual paging, fire alarm voice panels, two-way radio, and mass notification platforms such as InformaCast can deliver a Drop, Cover, and Hold On message to everyone at once.
- Add gas shutoff and fire station bay doors early. The study priced gas shutoff per incoming gas line, so plan on an automatic earthquake gas shut off valve for each line. Both actions scored well at LAX, and bay doors already have working installations in the United States. The study notes that the bay door decision rests with the fire department, so bring them in from the start.
- Plan fuel shutoff as a later phase. Work with fuel system operators to decide which valves and pumps make sense.
- Be selective with elevators and escalators. Focus on high-traffic conveyances instead of every unit.
- Set a shaking threshold for each action. The study calculated intensity thresholds per application so that minor shaking does not interrupt operations. Airports very close to a fault may get little or no warning in some earthquakes, so plan for that too.
- Write the procedures and train people. The study calls for emergency plans and staff training built around early warning, coordinated with airlines, tenants, and local emergency services.
Many facilities still have no automated response connected, which we covered in our look at why most facilities aren’t connected yet. Airports now have independent numbers to change that.
How Early Warning Labs supports airports
Early Warning Labs is an official USGS ShakeAlert licensed partner and a founding research-and-development partner on last-mile delivery and alerting. We have delivered commercial earthquake early warning since 2014. Our systems power more than 90% of the commercial ShakeAlert installations published by the USGS and protect more than 10 million people.
When ShakeAlert detects an earthquake, our system calculates the forecast shaking intensity and countdown at each protected site. If the forecast meets that site’s thresholds, it triggers audio and visual alerts and automated actions. Airports can use a Cloud Quake CQ Box on site, or a virtual IP interface with no on-site hardware for networked platforms like InformaCast. Both connect to the systems already in place: PA and paging, fire alarm voice, radio, digital signage, fire station bay doors, elevator recall, gas and fuel valve shutoff, gates, and backup power.
USGS has noted that Early Warning Labs helped Los Angeles organizations connect to ShakeAlert, including LA Metro, Cedars-Sinai Medical Center, NBCUniversal, Santa Monica College, and Los Angeles City Hall. We are also delivering station alerting and automated bay door action in the Cal OES-supported fire station pilot, the same application the airport study ranked highly at LAX.
If you run safety, facilities, or emergency management at a California airport, schedule an airport demo with Early Warning Labs. We’ll review your terminal PA, paging, fire alarm, and mechanical systems and show you which actions to put in phase one.
Frequently asked questions
How effective is earthquake early warning at airports?
The 2026 Cal OES airport feasibility study found benefit-cost ratios well above 1.0 for several actions. At LAX, alerts to passengers and staff scored 25.8, fuel shutoff 20.2, fire station bay doors 15.0, and gas shutoff 14.4. At Palm Springs, gas shutoff scored 100.0. Elevator stops scored below 1.0 at both airports.
Is there an earthquake early warning system for California airports?
Yes. The USGS ShakeAlert system covers California, Oregon, and Washington. An airport connects to it through a ShakeAlert licensed partner, which turns the alert into PA announcements, visual paging, and automated actions like gas shutoff or opening fire station bay doors.
Can California airports get funding for earthquake early warning?
Cal OES ran the FY 2025-26 Earthquake Early Warning Implementation Program for Airports, with $800,000 in total funding, awards up to $400,000, and no match required. Applications closed March 23, 2026. As of November 17, 2026, no new airport round is posted on the California Grants Portal.
What can an airport automate with earthquake early warning?
Common actions include PA and visual paging announcements, fire alarm voice messages, radio alerts, gas and fuel valve shutoff, opening fire station bay doors, stopping baggage systems, stopping selected elevators and escalators, and starting backup power. Each action can have its own shaking threshold.
Does earthquake early warning work if an airport is close to the fault?
It depends on the earthquake. Sites very close to the epicenter may get little or no warning because strong shaking can arrive with the alert. Airports farther away get more time. The study notes this, which is why thresholds and procedures should be set for each airport.
About EWL
Early Warning Labs (EWL) has partnered with the USGS to develop a powerful technology, that gives people time to take cover and creates automated responses for businesses, transportation & machinery to prevent massive damage.